Home   Contact Us   Download   中文版
Search:
Home About Us New product Products Network Feedback CONTNCT
XT7 air-tight tester series
XT76 air-tight tester series
XT77 air-tight tester series
XT75 air-tight tester series
XT71 series fully automatic pressure switch tester
The relief valve discharge XT72 series
XT2 series products
XT24 series
XT29 type constant temper
XT25 multiplex gas flow tester
XT320 flow verification
QT07-JIG
XT69 air workstation series experiments
Add: 21F Changhong Bd, SunGang Rd, Luohu District,Shenzhen, Guandong Province, P.R.C.
Tel: 0755-25586478
Fax: 0755-25588458
Email: 1318175880@qq.com
SiteUrl: http://www.jjdzyb.com/
Your Current Location:Home > Products > The relief valve discharge XT72 series > The relief valve discharge XT72 series
Product Name:The relief valve discharge XT72 series
Product Detailed:

The relief valve discharge pressure tester XT72 series

This detector is dedicated to setting pressure of safety valve (also called "opening pressure" or "release stress"), can also test the burst pressure containers of all kinds (also called "maximum pressure"), through the setting of the relief valve discharge pressure upper limit and lower limit, can detect and display the relief valve discharge interval (low, normal and high) and the maximum pressure before discharge, automatically shut down after the relief valve discharge air (energy-saving, environmental protection). The using my company's new XT0706 chassis series.

According to the requirements of customers, our company and on the basis of original increased the function of remote control, the operator only needs to near the relief valve by the remote control can operate the whole detection process.

Main performance:

l

The test pressure: 0 ~ 900.0 KPa;

L damage pressure: 2.0 MPa;

L digital display: 0 ~ 999.9

L minimum value: 0.1 KPa;

L precision level: 0.25 on the Richter scale;

L with tracheal: 6 x 4 pu tube

Or 8 x 5 pu tube;

L control mode: automatically shut off gas source;

L working power supply: AC 220 v;

L the machine power consumption: less than 35 va;

L product appearance: see the picture on the right

L panel size: 440 x 230 x 230 high wide was deep

L site operation instructions

1. The site must be equipped with compressed air, the output pressure is slightly larger than testing pressure (pressure reducing valve by adjusting the air compressor implementation);

2. Connect the power supply and ventilation way, set up safety normal discharge upper limit and lower limit, adjust the pressure regulating valve inlet pressure slightly higher than the upper limit.

3. Press the start button, gas path through, as the measured pressure relief valve, safety valve to be tested according to the discharge pressure can be divided into three kinds of circumstances, at the same time program controller always stay in front of the relief valve discharge "maximum pressure", the next time pressure automatically remove the "maximum pressure";

lXT72Complete valve tester manual(CH)  File Size:82.45KB  Click to download

LinkUrl: QIY168 | 18SHOW | NPICP | Business alliance network | Makepolo | The home of Chinese instruments | Huicong | Shang HuWang | 
Add:21F Changhong Bd, SunGang Rd, Luohu District,Shenzhen, Guandong Province, P.R.C.  Tel:0755-25586478    
CopyRight © 2024 Shenzhen Jinjing Electronic and Instrument Co., Ltd.  All rights reserved  粤ICP备17097517号